ipasol
Solar control glass
Modern glass architecture places the highest demands on the materials, in terms of aesthetics as well as technology. With ipasol, architects and planners can realize their buildings using forward-looking energetic concepts without having to abandon transparency and a captivating visual appearance.
Through ipasol façade glazing, plenty of daylight enters the room. At the same time, the extremely low total solar energy transmittance (g-value) ensures energy savings in the operation of air conditioning devices.
New to the ipasol solar control product range: ipasol neutral 61/33, ipasol platin 25/15, ipasol bright
ipasol neutral 61/33 is characterized by its high selectivity. ipasol platin 25/15 provides maximum protection against the sun (g-value 15 percent according to EN 410) in combination with adequately high light transmission (25 percent according to EN 410).
While ipasol neutral 61/33 presents a pleasantly neutral exterior, ipasol platin 25/15 stands out due to slightly increased external reflection of 28 percent. The new glass types of the series "ipasol bright" are especially in demand on the international market. In addition to excellent functionality, they also offer nuances of colour (white, grey, green, bronze, blue).
The unique quality of the ipasol glazing is achieved by means of a special, highly selective precious metal coating. It is applied to the outer pane on the side facing the space between the panes and is thus protected from environmental factors and mechanical damage.
New product marketing for ipasol solar control glass
The marking of our products consists of three different aspects: The marking describes the optical appereance (e.g. neutral or platin) and the figure combinations, which compose of light transmission (T-Value) and solarfactor (g-Value). Up to now the solar factor was declared according to DIN 67 507, which is not valid anymore. The solar factor is now specified according to EN 410. This implies slight changes of the solar factor, which lead to the corrections of ouur markings. The new product marking does not have any impact on the technical properties of our products. They only serve to explain our products for users and planners clearly.
old produkt marking ipasol
platin 25/14
shine 40/21
platin 47/28
neutral 48/25
neutral 50/25
neutral 60/31
neutral 61/31
neutral 68/34
neutral 70/36
neutral 73/39
new produkt marking ipasol
platin 25/15
sky 30/17
shine 40/22
platin 47/29
neutral 48/27
neutral 50/27
neutral 60/33
neutral 61/33
neutral 68/37
neutral 70/39
neutral 73/42
Old ipasol products, which are not part of our current product range are not updated. The technical properties relate to the composition 6/16/4 and will be applied as a product marking also for other glass make-ups and single coated glass.
